This card is a little rustic or vintage or repurposed.... (FYI the background card is not as pink as the camera picked it up)
I picked up 5 different fall colors paint chips at the Hardware store and ran them all through my big shot using Lawn Fawn leaves dies (love the cuts)
I ran vintage page of a book through a new background die from Tim Holtz / Sizzix to represent "wind"
Added some twine to the side and left this no sentiment note card to send to my daughter.
Showing posts with label book page. Show all posts
Showing posts with label book page. Show all posts
Tuesday, October 24, 2017
Thursday, November 3, 2016
Book page wreath
I saw this wreath advertised at a class which I thought was right up my alley.
Re-purpose an old book which I bought from the Salvation army for .99, sad to say this book was from 1948; The Valiant Lady. (This book was about 6" x 9")
Cutting a 10" x 10" square from foam board, I drew two circles one at 8" in circumference and then 4" circle within that.
Punched a hole in the square and ran a jute string through it so I can hang it when done. (see above drawing)
Taking the pages from the book (or if you are using music sheets you may need to cut them down)
I ripped them out and rolled them into a cone, to make the cone start at the lower corner of the page and roll it into a cone shape. I taped the upper side to keep it together.
To know where to place it on one of your two rings (on the white foam board) you stapled about 1.5 " up from the bottom point of the cone.
Taking hot glue gun, glued them by laying the stapled area to the outer ring. I believe there are 32 cones glued to the outer ring of my first layer.
I continued again to fold, tape, staple and hot glue the next grouping to the 4" ring. (I think 25 cones )
The 3rd layer, I rolled the cones on the long side of the page starting in the middle of the long edge thus creating a shorter wider cone and glued (8) them to the center. because there was a gap, so I added the 4th layer (8 more) which were placed between the cones on the 3rd layer.
I wasn't sure what I wanted to do in the middle , I had a few of these medallions I made for Christmas ornaments ...and glued one in the center (the medallions were made from old music sheets) .
I found the perfect spot in my home above my stairs when you walk into my house.
Re-purpose an old book which I bought from the Salvation army for .99, sad to say this book was from 1948; The Valiant Lady. (This book was about 6" x 9")
Cutting a 10" x 10" square from foam board, I drew two circles one at 8" in circumference and then 4" circle within that.
Punched a hole in the square and ran a jute string through it so I can hang it when done. (see above drawing)
Taking the pages from the book (or if you are using music sheets you may need to cut them down)
I ripped them out and rolled them into a cone, to make the cone start at the lower corner of the page and roll it into a cone shape. I taped the upper side to keep it together.
To know where to place it on one of your two rings (on the white foam board) you stapled about 1.5 " up from the bottom point of the cone.
Taking hot glue gun, glued them by laying the stapled area to the outer ring. I believe there are 32 cones glued to the outer ring of my first layer.
I continued again to fold, tape, staple and hot glue the next grouping to the 4" ring. (I think 25 cones )
I wasn't sure what I wanted to do in the middle , I had a few of these medallions I made for Christmas ornaments ...and glued one in the center (the medallions were made from old music sheets) .
I found the perfect spot in my home above my stairs when you walk into my house.
Subscribe to:
Posts (Atom)











